How to Fix USB shows no media in Disk Management Error!

Summary:

This article will explain to you the detailed steps to fix “USB shows no media in Disk Management” error. All you need to do is to follow the article to know more!
There are numerous error messages that we come across while working on an external storage device like USB flash drive, external hard Drive and SD Card, etc. “USB shows no media in Disk Management” is one such error message which gets generated to restrict you from accessing your data from the external devices.

Do not worry if you are getting this problem as “Removable disk shows no media in Disk Management” is not an unusual error message. There are plenty of ways that can help to fix the error; but, these solutions don’t come alone, there are extremely high chances of data loss which is stored in that specified device.


 Thus, it becomes imperative to recover data at the onset and then proceed towards applying solutions to fix this error.

What causes “USB shows no media in Disk Management” error?

  1. The storage devices like USB, SD Card, and Hard drive, etc. come with a lifespan, and when this lifespan exceeds, the storage media begins to fail. Also, physical damage caused to the storage media like scratches and fall from height, etc. can damage it.
  2. Unsafe ejection of the external storage device.
  3. Corrupted or damaged Master Boot Record (MBR) and Partition Boot Record (PBR)
  4. The problem caused in the external storage device due to some logical reason.
  5. Virus or malware attack.

At first, we would recover all relevant data which is stored in an external storage media to prevent data loss. We recommend using professional software such as “Bitwar Data Recovery Software” to restore the data.

Recovery with Bitwar Data Recovery Software:

Step1. Download the software from the official website: https://www.r-datarecovery.com. After downloading successfully, install the software.

Step2: Connect your external storage device to your computer.

Step3: Now, launch the software, select the option “External Devices Recovery” after clicking on the middle-bottom of the software: Standard Mode, and then click on the SD Card/USB you wish to recover data from followed by a click on “Next” button.


Step4: After this, choose the file type that you want to retrieve and press on “Next” button.


Step5: In the final step, preview the data/files you wish to restore and click on the “Recover” button to start recovery.


Once recovery is done, make sure to save your data somewhere safe. It is suggested not to save data back to the same USB/SD Card that caused the issue.
After getting back the needed data using “Bitwar Data Recovery Software”. You can now try to follow with below solutions to fix USB flash drive shows no media in Disk Management error. Please note that these solutions are also workable for the external hard drive, SD memory card or any other external storage devices shows no media.

How to fix “USB shows no media in Disk Management” error:

Many users think that the problem of “USB shows no media in Disk Management” can be solved by formatting the external storage device. But it’s a fallacy since the error message says that the storage device is empty; therefore, formatting cannot be done.

Solution1: Fix the error by checking for faults in the storage device:

Step1: Connect the USB/SD Card to your computer device and launch File Explorer.

Step2: Right-click on File Explorer and select Properties option from the pop-up window.

Step3: Now, choose the “Tools” option from the Properties and click on the “Check” button located under the “Tools” option.


Step4: If there are errors in the external storage media, the Windows will notify you about that by flashing a message “We found errors on the drive”.

To prevent any data loss, click on the “Repair” option to repair the external storage device, and remove the errors.

You may proceed with the next solution if the issue cannot be fixed with the first one.

Solution2: Fix the error using CHKDSK:

Step1: Click on Start to open “cmd” in the search box provided.

Step2: Launch the Command Prompt by right-clicking on it and select “Run As Administrator”.

Step3: Now, type chkdsk/f/r F:  and press on Enter button (Fis the SD drive letter, you can replace F with the specific letter of your own drive).


Step4: Once checking process is finished, close the window and go to Disk Storage Format Tool and check if the issue has been resolved or not.

Solution3: Resolve the issue by assigning a new drive letter:

Step1: Press Win logo key + R and type “Diskmgmt.msc” in the Run window.

Step2: After opening the Disk Management, right-click on the no media disk and choose “Change Drive Letter and Paths…”


Step3: Now, click on Change.

Step4: In this step, select a drive letter from the drop-menu and then hit on the OK button.

Please make sure you need to select a drive letter this is not using currently in your system.

Solution4: Fix no media issue by enabling the drive in Device Manager:

Read more? Please check this URL:


评论

热门博文